Hydroponic tower with 5 two cup floors.

Allows to grow side by side 10 plants. Indoor or outdoor. Material used is PETG, which is non-toxic and food grade. PETG is more UV and temperature resistant compared to PLA. It allows to have the tower on direct sunlight or indoor, without any defects caused by UV light.

You can increase the tower height by purchasing additional modules and cups. All available in our store.

Tower has 5 cups floors with two cups each. Includes top sprinkler module and lid. Two spacers for convenience: 40mm and 120mm.

Method:
Tower is built from interchangeable lockable modules. Inside the modules is guide for the hose that is connected to the submersible water pump that sits in the base with the nutrient liquid and pumps water up to the sprinkler at the top. Water then drips down and irrigates the plant cups and circulates through the pump back to the top.

We are now selling the tower setup including the stand for 5 Gallon bucket. Bucket can be easily purchased in Home Depot or Lowe\'s. Holder is securing the tower above the bucket, where you place the pump and nutrient water for irrigation that sprinkles from the top of the tower down over the cups.


Tower Build:
5x 2 way swing module
1x Sprinkle module
1x Lid for sprinkler module
1x Module spacer 12\"
1x Module spacer 4\"
10x Black hydroponic cups (optionally you can purchase PETG self-locking deep cups in our shop).
1x Submersible water pump 220gph, ultra quiet
1x Vinyl clear hose 1/2\", 5 feet long
1x 5 Gallon bucket (12\" diameter like Home Depot or Lowes buckets)


Complete hydroponic growing set. Grow indoor or outdoor.

*bucket is not part of the sold items. it is easily purchased in hardware store, like Home Depot or Lowe\'s.