LED Grow Light Plant Growing Lamp Full Spectrum for Indoor Plants Hydroponics US

2 Head LED Grow Light Plants Full Spectrum Plant Grow Lamp with Stand for Indoor

2 heads LED Growing Light Plant 9 Brightness Levels: : 20%, 30%, 40%, 50%, 60%, 70%, 80%, 90%, 100%. Grow light meets the growth needs of different plants to a large extent.

- Extra Dimming Modes: Ideal for different growth cycles. Control or adjust the intensity of light via the controller switch, as some plants require higher or lower intensity than the others.

- Cycling Timer: The On/Off Timer can now be automatically set up to turn on and off at the same time everyday. You have the option to set it to 3/6/9/12 hours.

- Easy to Install: with flexible Gooseneck & strong clamp,it allows you to place the growth light in any direction to provide the best lighting angle for your plants，meet the cover around the plant.Powered by USB or AC Power Plug.

- Widely Used: Our grow lamp is suitable for indoor potted plants or an indoor garden. It accelerates the growth of various types of plants in every stage of development.

Two tubes: 20W Double Tube 40 LED Light

PAY ATTENTION

Read carefuly the information below betore using the Grow Light

1.Make sure that the light works under a normal enviroment: -20°C~40°C，45%-95%RH.

2.Do not touch , beat or move the light when it's working.

3.When the light is on you should wear sunglasses . Looking at the light without sunglasses it might hurt your eyes.

4. The light should not work more than 14 hours a day to ensure its lifespan and give the plants enough time to absorb"sunlight energy" given by the : Four options to set up the timer : 3 hours , 6 hours , 9 hours and 12 hours according to the plants need . And you can also keep it permanently ON . ( Note : This is a repeat timer , when the lights turn off automatically,the next day If the power is connected all time the lights will turn on at the same time that the timer was set up.

2.Dimming : 9 dimming levels of brightness for different stages of plant : 4 Modes for for different stages of plant growing.see the spectrum diagrams below.

Red / Blue LEDS : gives the targeted wavelengths ( 460 nm and 630 nm ) for plants.

BLUE LEDS : help plants with chlorophyll synthesis to intake more energy for better a germination.

RED LEDS : contribute to photosynthesls , germination , fowering and other results.

Full spectrum LEDS : CRI>97 , 4000K color temperature , fits for all stages of plant : MAX 10W

LED Chips : 44 Red ( 630nm ) , 22 Blue ( 460nm ) , 66 White

Lift time: 45,000 Hours

Materlal : Aluminum+PVC

Beam Angle : 360 Degree Adjustable

Input voltage : 5V (2A USB charger included)

TIMER & CONTROLLER

1.Press and hold the power switch button during 3 seconds to turn ON/OFF the lamps.

2.Press the dimming button to adjust among the 9 levels of brightness.

3.Press the timing botton to set timers.There are 3 / 6 / 9 / 12 hours and press again to cancel the timer.

4.Press the mode switch button to choose the spectrum that your plants need.

Packing: